HOW DO I SET UP MY BRIZA COOL LARGE?

  1. Pull out the drawer on the back of the unit and add  23 L / 6 gal of water.
  2. The max water line is in a little window at the bottom of the back of the Briza.
  3. Plug into power and start!

WHAT IS THE WATER CAPACITY?

The BRIZA Cool Large has an 23 L / 6 gal water tank capacity.

 

HOW MUCH SPACE WILL THE BRIZA COVER?

The BRIZA Cool Large covers 22 m2 / 246 sq ft.

HOW DO I REMOVE/REPLACE THE FILTERS?

  1. Remove the three mesh filters on the rear of the unit, one on the top and one on both sides.
    • We recommend removing any dust build up on the mesh filter gently.
  2. Remove the two white plastic screws from the top of the rear panel and remove the rear panel.
  3. Slide out the three wood filters inside the unit.
  4. Place the new filter in to the unit with the smaller wood filters on either side and the large wood filter on the back.
  5. Place the panel back on starting at the bottom of the panel then put the screw on to hold the rear panel in.
  6. Slide three mesh filters back into the unit.

HOW OFTEN SHOULD I REPLACE MY FILTERS?

You should replace your filters only as needed, about every 6-12 months.  If you begin to notice a smell, or if your filters look like they are beginning to mold, it means they need to be cleaned or replaced if the damage is severe.

 

HOW DO I CLEAN MY FILTERS?

Make a mixture of one part vinegar to ten parts water. After removing your filters, place them in the vinegar and water solution and let them soak for 15 min. Take them out and gently dab them with a paper towel to remove excess water and leave them until they are dry to the touch. If you would like to speed up the drying process, you can put them in the unit and run the fan-only function for 30 min. After cleaning the filters, there may be a mild scent that will go away quickly after your first use.

HOW DO I CLEAN MY BRIZA?

The Briza should be cleaned once every 2 weeks with lukewarm water and a mild detergent or lukewarm water and vinegar to avoid dust, dirt, and calcium build-up. If you are using the Briza in a garage or basement where there is more dust, then cleaning should be increased to weekly. It is best to run the fan for 30 minutes after cleaning and after each use.

  1. Remove the three mesh filters on the rear of the unit, one on the top and one on both sides.
  2. Remove any dust build up on the mesh filter gently.
  3. Remove the two white plastic screws from the top of the rear panel and remove the rear panel.
  4. Wipe the inside of the tank with lukewarm water and a mild detergent or lukewarm water and vinegar.
  5. Place the panel back on starting at the bottom of the panel then put the screw on to hold the rear panel in.
  6. Slide three mesh filters back into the unit.
  7. Turn on the fan-only function for 30 minutes to completely dry the device before storing or running.

WHY IS MY BRIZA LEAKING?

Causes may include:

  • Overfilling – when too much water is added into the tank.
  • Clogged holes – this may occur if you live in an area with hard water and you are not using distilled water. They can also become clogged during shipping, from filter debris.

 

WHAT ARE THE FILTERS MADE OF?

The Briza filters are made from natural wood fibers.

 

WHY IS THERE A SMELL?

There may be a slight scent the first time you run your Briza. This is caused by water passing through the filters, which are made from natural wood fibers. This will go away quickly after your first use.

 

IS THERE A WARRANTY?

Your Briza comes with a 30 day buy back guarantee. If you purchased your device online, you have a two year replacement warranty on your Briza. If you purchased it at a trade show or exhibition, your Briza comes with a one year warranty, however you can extend it by registering your device on our website. Click here to register.

 

 

If you have any other questions, comments, or concerns, please contact our customer service department at 1.888.984.7471 (Monday – Friday 9am – 5pm PST) or info@brizacomfort.com.